Petroleum & Grease Testing Instruments

Auto- Cooling Cloud & Pour point tester as per IS – 1448 P-10, IP-15, ASTM D- 97, D- 5950 & ISO- 3016, , 4 tests provision , Unit of Auto-Cooling by electrical freezing system, single Container size: 10” x 10” x 8” inner chamber made of stainless steel, outside made of M. S. Powder coating painted, inside copper pipe fittings for cooling, suitable compressor and radiator with fan blower, temperature can be control from ambient to – 40 to - 42 max. deg. C, controlled by Double display Digital Temperature PID controller to observe set value & process value and accuracy +/- 1.5 –2 deg. C,4 Nos. glass & metal tube, but without thermometer, run by 220-230 volt, Ac .

Cleveland open cup Stanhope-Seta L shape Model”as per IP-36 & ASTM D- 92, electrically heated model with Digital temperature indicator of 0.1 deg. C display of LED with PT- 100 sensor, Temperature ranges from above ambient 5 deg C to 400.0 deg. C, complete with sample cup & insulated handle, main switch with indicator, thermometer clip, gas test flame, gas control cock/reducing socket to connect with gas cylinder, run by 220 Volt, Ac 50 Hz. (Without Gas Cylinder)

ASTM Color comparator discs with box as per ASTM D-1500, one disc of range 0.5 to 4.0 and another disc range 4.5 to 8.0, division of 0.5, complete set. This would be observed by artificial day light, manual operate.

Drop Point tester of grease as per ASTM D-566, & IP-132, with Digital Indicator with sensor complete with electrical heated model with energy control motorized stirrer, beaker, cup, tube without thermometer.

Drop Point tester of grease as per ASTM D-566, & IP-132, with Digital Indicator with sensor complete with electrical heated model with energy control motorized stirrer, beaker, cup, tube without thermometer.

Features

• Measures the ability of a grease to protect a bearing against corrosion in the presence of water. Two sets of grease-coated bearings per station are partially immersed in water and rotated at a speed of 80 rpm in a sequence of running and resting periods. At end of the test, the raceways of the bearing outer rings are inspected for rust.
• Performs both standing and dynamic test of lubricating greases and oils.
• Capable of performing 4/6/8 tests at a time.
• Consisting of : Test rig with base plate, electric motor with gear and run/stop electronic timer, steel shaft, plummer blocks, self-aligning ball bearings, adapter sleeves, sleeve nuts and V-ring seals.
• Power supply 220 V, 1 Phase, 50 Hz

Distillation apparatus as per IP - 123, ASTM D - 86, IS -1448, P-18, Single test model controlled by energy control, geared heated, flask, cylinder, stainless steel condenser, side delivery type, without thermometer, run by 220-230 Volt . Ac 50 Hz.. NOTE: If required digital indicator with sensor fitting against thermometer cost would be extra.

Mechanical Grease Worker as per IP -50 for Single worker, complete with GE ½ H. P. motor/gear fittings on heavy iron base with Digital Presetting Counter Meter for 5 Digit, with Motor Starter switch for N/OFF switch, run by 220 Volt, Ac. 

Pensky Martens Flash point Tester as per IP-34, ASTM D - 93 & IS –1448 P-21, electrically heated model with energy control, gas test pilot flame, shutter mechanism top with cup/handle, without thermometer, run by 220-230 Volt, AC

Kinematics Viscometer bath of Rectangular type as per IP-71, ASTM D- 445/446, 6 tests provision, to determine the viscosity at 40 deg to 99.9 deg C, and accuracy 0.1 deg. C, double wall glass window system, fully insulated by glass wool or puff, inside stainless steel chamber, outer chamber made of M. S. powder coated or ASPA grade automotive painted, motorized stirrer, top plate made of Stainless Steel with 6 nos. 50mm hole, lighting system, temperature controlled by Double display PID Type Auto Tune Digital controller of 0.1°C division., suitable sensor with pre-setting system to set test temperature,4 Nos. lid of brass of Nickel Chromium plated, run by 220 –230 Volt, Ac. ( Without thermometer, Bath medium, Viscometer holder & Viscometer Tube.)

Features-----> As per ASTM D-1831

• Single and dual speed.
• This test is intended to subject lubricating greases to such a shear stresses as are typical of ball and roller bearings.
• A sample of the lubricating grease under evaluation is worked by rollers rotating in cylinders at a specified temperature and the penetration characteristics of the sample before and after rolling compared in a penetration test in compliance with standard.
• Equipped with an air circulated bath digitally controlled upto +165°C.
• 2/4 corrosion proof stainless steel roll test cylinders with stainless steel roller.
• Rotates steel test cylinders at 10 or 165 rpm.
• Power supply : 440 V, 3 Phase.

Kinematic Viscometer Bath for Six tests provision, glass jar 20 litre capacity made of borosile, heat resistance character, size: 12” dia X 11.5” height, top cover made bechalite, with 50 mm. hole for six to place viscometers and jacketed model for avoid heat loss, front & back glass window, left & right metal body, controlled by Double Display Digital Temperature Microprocessor based PID controller of with accuracy 0.1, to observe set value & process value of the bath, Temperature range from ambient to 120 deg. C, with accuracy of 0.1, booster heater, control heater with variac, flexible chord type stirrer of saw-teeth blade by 1/35 H. P. GE Make pure AC motor, lighting system, painted by ASPA or powder coating, 2 Nos. Viscometer Holder, as per ASTM D- 445/446, IP -71 & IS-1448 P-25 specification, run by 220 volt, AC. (Without Bath Medium, viscometer tube & thermometer) .